Education：

2006.08-2010.07, School of Materials Science and Engineering, Harbin Institute of technology. Doctor of Engineering.
2004.08-2006.07, School of Materials Science and Engineering, Harbin Institute of technology, Materials Processing Engineering, Master of Engineering.
2000.09-2004.07, School of Mechanical Engineering, Xiangtan University. Bachelor of Engineering.

Career：

2019.12- College of Mechatronics and Control Engineering, Shenzhen University. Professor.
2013.12-2019.11 College of Mechatronics and Control Engineering, Shenzhen University. Associate professor.
2010.07-2013.11 College of Mechatronics and Control Engineering, Shenzhen University. Assistant professor.

Project：

Publication：

[26] Kangsen Li, Gang Xu, Xiaohua Liu, Feng Gong*. Deformation Behavior of Glass Nanostructures in Hot Embossing. ACS Applied Materials & Interfaces. 2020, 12: 36311-36319.
[25] Feng Guo, Xinfang Huang, Zhiwen Xie*, Kangsen Li, Feng Gong*, Yongjun Chen, Qiang Chen. Understanding the age-hardening mechanism of CrWN coating. Thin Solid Films. 2020, 711: 138298(5pp).
[24] Kangsen Li, Gang Xu, Hexi Luo, Xiaohua Liu, Feng Gong*. Glass flow behaviors in micro-channels during hot embossing. Ceramics International. 2020, 46: 21517-21526.
[23] Kangsen Li,Xinfang Huang, Qiang Chen, Gang Xu, Zhiwen Xie*, Yuanyuan Wan, Feng Gong*. Flexible fabrication of optical glass micro-lens array by using contactless hot embossing process. Journal of Manufacturing Processes. 2020, 57: 469-476.
[22] Kangsen Li, Gang Xu, Xinfang Huang, Qiang Chen, Zhiwen Xie*, Feng Gong*. Surface evolution analysis of CrxWyNz coatings on WC mold in glass molding process. Surface & Coatings Technology. 2020, 393: 125839(8pp).
[21] Xinfang Huang, Zhiwen Xie*, Kangsen Li, Qiang Chen, Yongjun Chen, Feng Gong*. Thermal stability of CrWN glass molding coatings after vacuum annealing. Coatings, 2020, 10: 198(11pp).
[20] Kangsen Li, Kai Jiang, Gang Xu, Xiaohua Liu, Feng Gong*. Experimental and simulated analysis of glass deformation and filling modes during partial-filling hot embossing process. Ceramics International. 2020, 46: 8059-8067.
[19] Xinfang Huang, Zhiwen Xie*, Kangsen Li, Qiang Chen, Feng Gong*, Yongjun Chen, Bo Feng, Suying Hu, Yan Chen, Bing Han, Di Wu. Microstructure, wear and oxidation resistance of CrWN glass molding coatings synthesized by plasma enhanced magnetron sputtering. Vacuum. 2020, 174: 109206(12pp).
[18] Zhiwen Xie, Feng Guo, Xinfang Huang, Kangsen Li, Qiang Chen*, Yongjun Chen, Feng Gong*. Understanding the anti-wear mechanism of SiCpWE43 magnesium matrix composite. Vacuum. 2020, 172: 109049(4pp).
[17] Xinfang Huang, Zhiwen Xie*, Kangsen Li, Qiang Chen, Feng Gong*, Yongjun Chen, Bo Feng, Yan Chen, Yuanyuan Wan. Effect of annealing environment on the microstructure and mechanical property of CrWN glass molding coating. Surface & Coatings Technology. 2020, 383: 125281(10pp.)
[16] Kangsen Li, Gang Xu, Xinfang Huang, Zhiwen Xie*, Feng Gong*. Temperature effect on the deformation and optical quality of moulded glass lenses in precision glass moulding. International Journal of Applied Glass Science. 2020, 11: 185-194.
[15] Jiang Ma, Can Yang, Xiaodi Liu, Baoshuang Shang, Quanfeng He, Fucheng Li, Tianyu Wang, Dan Wei, Xiong Liang, Xiaoyu Wu, Yunjiang Wang, Feng Gong*, Pengfei Guan*, Weihua Wang*, Yong Yang*. Fast surface dynamics enabled cold joining of metallic glasses. Science Advances. 2019, 5: eaax7256.
[14] Jiaqi Ran, Li Xu, Jilai Wang, Teng Xu, Feng Gong*. Influence of dead metal zone on dislocation strengthening effect during micro-progressive forming. International Journal of Advanced Manufacturing Technology. 2019, 105: 1129-1141.
[13] Kangsen Li, Gang Xu, Xinfang Huang, Zhiwen Xie, Feng Gong*. Manufacturing of micro-lens array using contactless micro-embossing with an EDM-mold. Applied Sciences. 2019, 9: 85(12pp).
[12] Canbin Zhang, Jiang Ma, Xiong Liang, Feng Luo, Rong Cheng, Feng Gong*. Fabrication of metallic bipolar plate for proton exchange membrane fuel cells by using polymer powder medium based flexible forming. Journal of Materials Processing Technology. 2018, 262: 32-40.
[11] Canbin Zhang, Feng Gong*. Deep drawing of cylindrical cups using polymer powder medium based flexible forming. International Journal of Precision Engineering and Manufacturing-Green Technology. 2018, 5(1): 63-70.
[10] Qiang Chen, Zhiwen Xie*, Tian Chen, Feng Gong*. Tribocorrosion failure mechanism of TiN/SiOx duplex coating deposited on AISI304 stainless steel. Materials. 2016, 9: 963(12pp).
[9] Feng Gong, Shunhua Chen, Jiaqi Ran, Zhi Yang, Jiang Ma*. Tuning the performance of bulk metallic glasses by milling artificial holes. Materials Science & Engineering A. 2016, 668: 50-54.
[8] Jiang Ma, Feng Gong*, Zhi Yang, Wenqin Zeng. Microdeep drawing of C1100 microsquare cups using microforming technology. International Journal of Advanced Manufacturing Technology. 2016, 82: 1363-1369.
[7] Feng Gong*, Zhi Yang, Qiang Chen, Zhiwen Xie, Dayu Shu, Jiali Yang. Influences of lubrication conditions and blank holder force on micro deep drawing of C1100 micro conical-cylindrical cup. Precision Engineering. 2015, 42: 224-230.
[6] Jiang Ma, Xiong Liang, Xiaoyu Wu, Zhiyuan Liu, Feng Gong*. Sub-second thermoplastic forming of bulk metallic glasses by ultrasonic beating. Scientific Reports. 2015, 5: 17844.
[5] Feng Gong*, Bin Guo. Size effects on mechanical properties of copper thin sheet in uniaxial tensile tests. Materials Science (Medziagotyra). 2014, 20(4): 509-512.
[4] Tian Chen, Zhiwen Xie*, Feng Gong*, Zhuangzhu Luo, Zhi Yang. Correlation between microstructure evolution and high temperatureproperties of TiAlSiN hard coatings with different Si and Al content. Applied Surface Science. 2014, 314: 735-745.
[3] Feng Gong*, Bin Guo. Effects of solid lubrication film on SKD11 in micro sheet forming. Surface & Coatings Technology. 2013, 232: 814-820.
[2] Feng Gong*, Bin Guo. Effects of influencing factors on friction coefficient in microsheet forming. Materials Research Innovations. 2013, 17(S1): s7-s11.
[1] Feng Gong*, Bin Guo, Chunju Wang, Debin Shan. Micro deep drawing of micro cups by using DLC film coated blank holders and dies. Diamond & Related Materials. 2011, 20(2): 196-200.

Conference：

Patent：

Book：

Prize：

Others：