教育背景：

2013.09-2016.12，深圳大学，工学博士

工作履历：

2025.02-至今，深圳大学，机电与控制工程学院，副教授
2019.11-至今，深圳大学，机电与控制工程学院，副研究员
2019.06-2019.10，深圳大学，机电与控制工程学院，助理教授
2017.01-2019.04，深圳大学-哈尔滨工业大学联合培养，博士后

主持项目：

[1]国家自然科学青年基金,20万元，结题，主持
[2]深圳市基础研究面上项目,30万元，结题，主持
[3]深圳市稳定支持计划面上项目，60万元，在研，主持
[4]深圳大学科研启动项目，20万元，结题，主持
[5]深圳大学教学改革项目，1万元，在研，主持

代表期刊论文 ：

[1]Chunyang Zhao, Jiayan Sun, Jingyi Fang, Xurui Li, Feifan Zhao, Jianguo Lei*. Multi-scale hybrid attention aggregation networks for multi-modal monitoring in laser-induced thermal-crack processing [J]. Mechanical Systems and Signal Processing, 2025, 223: 111883.（中科院一区，Top，IF：7.9）
[2]Jianguo Lei, Haotian Shen, Huiyong Wu, Weijie Pan, Xiaoyu Wu, Chunyang Zhao. Ultrasonic vibration-assisted electrical discharge machining of enclosed microgrooves with laminated electrodes [J]. Journal of Materials Research and Technology, 2024, 30: 9521-9530.（中科院一区，Top，IF：6.4）
[3]Mingwu Su, Yixian Ou, Jia Fu, Kaibin Huang, Jianguo Lei*, Likuan Zhu*. Developing an orbitally shaken bioreactor featuring a square vessel wall with a large circular chamfer [J]. Journal of Biotechnology, 2024, 392: 69-77.（中科院二区，IF：4.1）
[4]Bo Wu, Huiyong Wu, Jianguo Lei*, Haotian Shen, Bin Xu, Hang Zhao, Likuan Zhu, Xiaoyu Wu. Experimental study on electrode wear during the EDM of microgrooves with laminated electrodes consisting of various material foils [J]. Journal of Materials Research and Technology, 2024, 29: 4191-4199.（中科院一区，Top，IF：6.4）
[5]Jianguo Lei, Xiaoyu Wu*, Zhiwen Zhou, Bin Xu*, Likuan Zhu, Yong Tang. Sustainable mass production of blind multi-microgrooves by EDM with a long-laminated electrode. Journal of Cleaner Production, 2021, 279: 123492(12pp). （中科院一区，Top，IF：7.246）
[6]Jianguo Lei, Xiaoyu Wu*, Zhenlong Wang*, Bin Xu, Likuan Zhu, Wen Wu. Electrical discharge machining of micro grooves using laminated disc electrodes made of Cu and Sn foils. Journal of Materials Processing Technology, 2019, 271: 455-462. （中科院二区，Top，IF：4.669）
[7]Jianguo Lei, Xiaoyu Wu*, Bin Xu*, Zhentao Zhao, Shuangchen Ruan, Rong Cheng. Laminated fitting fabrication of Cu-Sn composite 3D microelectrodes and elimination of ridges on the machined surface of 3D micro-cavities. Journal of Materials Processing Technology, 2015, 225: 24-31. （中科院二区，Top，IF：4.669）
[8]Jianguo Lei, Bin Xu, Likuan Zhu*. Experimental study on the fabrication of 3D microelectrodes for electrochemical micromachining. IEEE Access, 2020, 8: 97056-97063. （中科院二区，Top，IF：3.745）
[9]Jianguo Lei, Kai Jiang, Xiaoyu Wu, Hang Zhao, Bin Xu*. Surface Quality Improvement of 3D Microstructures Fabricated by Micro-EDM with a Composite 3D Microelectrode. Micromachines, 2020, 11(9): 868(13pp). （中科院三区，IF：2.524）
[10]Jianguo Lei, Xiaoyu Wu*, Bo Wu, Bin Xu*, Kai Jiang, Zhenlong Wang, Shuangchen Ruan. Experimental research on eliminating the stair-stepping effect of laminated 3D microelectrodes by micro-ECM. The International Journal of Advanced Manufacturing Technology, 2018, 98: 937-946. （中科院三区，IF：2.633）
[11]Jianguo Lei, Xiaoyu Wu*, Bo Wu, Bin Xu, Dengji Guo, Jinming Zhong. Fabrication of 3D Microelectrodes by Combining Wire Electrochemical Micromachining and Micro-electric Resistance Slip Welding. Procedia CIRP, 2016, 42: 825-830.（EI）
[12]Kai Jiang, Xiaoyu Wu*, Jianguo Lei*, Zuohuan Hu, Guoli Gao, Yong Tang, Dongfeng Diao. Investigation on the geometric evolution of microstructures in EDM with a composite laminated electrode. Journal of Cleaner Production, 2021, 298: 126765(13pp).（中科院一区，Top，IF：7.246）
[13]Zhiwen Zhou, Xiaoyu Wu*, Jianguo Lei*, Zuohuan Hu, Guoli Gao, Yong Tang, Chuntao Chang. Fabrication of microgrooves with secondary microstructures by electrical discharge machining using a functionally graded laminated electrode. Journal of Micromechanics and Microengineering, 2021, 31: 015003(10pp). （中科院三区，IF：1.739）
[14]Bin Xu, Xinke Feng, Xiaoyu Wu, Feng Luo, Lianyu Fu, Xuetao Zhai, Yonghua Zhao, Hang Zhao, Jianguo Lei*. Micro-EDM-assisted machining micro-holes in printed circuit board. The International Journal of Advanced Manufacturing Technology, 2021, 113: 1191-1201. （中科院三区，IF：2.633）
[15]Bin Xu, Kang Guo, Likuan Zhu, Xiaoyu Wu, Jianguo Lei*. Applying Foil Queue Microelectrode with Tapered Structure in Micro-EDM to Eliminate the Step Effect on the 3D Microstructure's Surface. Micromachines, 2020, 11: 335(14pp). （中科院三区，IF：2.524）
[16]Wen Wu, Xiaoyu Wu*, Jianguo Lei*, Bin Xu, Kai Jiang, Zhaozhi Wu, Heming Yin, Wen Li. Fabrication of deep-narrow microgrooves by micro-EDM using rotary dentate disc foil electrodes in emulsion. Journal of Micromechanics and Microengineering, 2019, 29: 035014(10pp). （中科院三区，IF：1.739）
[17]Zhaozhi Wu, Xiaoyu Wu*, Jianguo Lei*, Bin Xu, Kai Jiang, Jinming Zhong, Dongfeng Diao, Shuangchen Ruan. Vibration-assisted micro-ECM combined with polishing to machine 3D microcavities by using an electrolyte with suspended B4C particles. Journal of Materials Processing Technology, 2018, 255: 275-284. （中科院二区，Top，IF：4.669）
[18]Bin Xu, Kang Guo, Xiaoyu Wu*, Jianguo Lei*, Xiong Liang, Dengji Guo, Jiang Ma, Rong Cheng. Applying a foil queue micro-electrode in micro-EDM to fabricate a 3D micro-structure. Journal of Micromechanics and Microengineering, 2018, 28: 055008(11pp). （中科院三区，IF：1.739）
[19]Bin Xu, Xiaoyu Wu*, Jianguo Lei*, Hang Zhao, Xiong Liang, Rong Cheng, Dengji Guo. Elimination of 3D micro-electrode’s step effect and applying it in micro-EDM. The International Journal of Advanced Manufacturing Technology, 2018, 96: 429-438. （中科院三区，IF：2.633）
[20]Kai Jiang, Xiaoyu Wu*, Jianguo Lei*, Zhaozhi Wu, Wen Wu, Wen Li, Dongfeng Diao. Vibration-assisted wire electrochemical micromachining with a suspension of B4C particles in the electrolyte. The International Journal of Advanced Manufacturing Technology, 2018, 97: 3565-3574. （中科院三区，IF：2.633）
[21]Bo Wu, Xiaoyu Wu*, Jianguo Lei*, Bin Xu, Shuangchen Ruan, Jinming Zhong. Study on machining 3D micro mould cavities using reciprocating micro ECM with queued foil microelectrodes. Journal of Materials Processing Technology, 2017, 241: 120-128. （中科院二区，Top，IF：4.669）
[22]Wenyan Luo, Xiaoyu Wu*, Jianguo Lei*, Bin Xu, Rong Cheng, Shuangchen Ruan. Micro resistance weld moulding to fabricate CuSn33 alloy parts. Journal of Materials Processing Technology, 2016, 231: 137-142. （中科院二区，Top，IF：4.669）
[23]Bin Xu, Xiaoyu Wu*, Jiang Ma, Xiong Liang, Jianguo Lei*, Bo Wu. Shuangchen Ruan, Zhenlong Wang. Micro-electrical discharge machining of 3D micro-molds from Pd40Cu30P20Ni10 metallic glass by using laminated 3D micro-electrodes. Journal of Micromechanics and Microengineering, 2016, 26: 035004(10pp). （中科院三区，IF：1.739）

代表会议论文：

[1] Jianguo Lei, Xiaoyu Wu*, Bin Xu, Likuan Zhu, Zhiwen Zhou, Dengji Guo, Kai Jiang, Yonghua Zhao. Fabrication of microgrooves by EDM using a laminated disc electrode consisted of different material foils. Procedia CIRP, 2020, 95:578-583.
[2] Kai Jiang, Xiaoyu Wu*, Jianguo Lei, Zhaozhi Wu, Bin Xu*, Dengji Guo, Dongfeng Diao. Investigation of the Step Effect in Laminated 3D Microelectrodes for Electrochemical Micromachining. Proceedings of the 13th Asia-Pacific Conference on Materials, 2018, 229-308.
[3] Zhaozhi Wu, Dengji Guo*, Xiaoyu Wu*, Bin Xu, Jianguo Lei, Kai Jiang, Dongfeng Diao. Vibration-assisted Micro-ECM by Laminated 3D Microelectrode Using a Low-concentration NaNO3 Electrolyte Containing Suspended B4C Particles. Proceedings of the 13th Asia-Pacific Conference on Materials, 2018, 309-318.
[4] Dengji Guo, Xiaoyu Wu*, Jianguo Lei, Bin Xu, Reo Kometani, Feng Luo. Fabrication of micro/nanoelectrode using focused-ion-beam chemical vapor deposition, and its application to micro-ECDM. Procedia CIRP, 2016, 42:733-736.

代表专利：

[1]雷建国, 伍晓宇, 伍博, 徐斌, 周志文, 程蓉, 钟金明, 朱立宽, 赵航. 一种三维微结构加工方法及三维微结构, 2019.12.20, 中国, 发明专利, 授权号: ZL 201911328794.3
[2]雷建国, 伍晓宇, 周志文, 徐斌, 江凯, 汤勇, 赵航. 电火花磨削加工表面微沟槽的装置, 2020.08.06, 中国, 实用新型专利, 授权号: ZL202021626712.1
[3]雷建国, 伍晓宇, 周志文, 徐斌, 江凯, 汤勇, 赵航. 电火花磨削加工表面微沟槽的方法及其装置, 2020.08.06, 中国, 发明专利, 授权号: ZL202010785647.5
[4]雷建国, 伍晓宇, 徐斌, 周志文, 江凯, 朱立宽. 微细电解加工电极及其加工方法、微细电解加工装置, 2020.05.22, 中国, 发明专利, 授权号: ZL202010023236.2
[5]雷建国, 伍晓宇, 徐斌, 周志文, 江凯, 朱立宽. 微细电解加工电极及微细电解加工装置, 2020.01.09, 中国, 实用新型专利, 授权号: ZL202020049577.2
[6]伍晓宇, 雷建国, 徐斌, 汤勇, 唐恒, 周超兰. 一种多材质叠层电极的制备方法, 2019.11.29, 中国, 发明专利, 授权号: ZL 201911201507.2
[7]伍晓宇, 雷建国, 徐斌, 汤勇, 唐恒, 周超兰. 梯度材料电极及其制备方法, 2019.11.29，中国, 发明专利, 授权号: ZL201911201335.9
[8]伍晓宇, 雷建国, 吴稳, 伍博, 鲁艳军, 徐斌. 微沟槽电火花加工工具电极及其制备方法, 2019.02.05, 中国, 发明专利, 授权号: ZL201710348594.9
[9]伍晓宇, 雷建国, 钟金明, 徐斌, 郭登极, 阮双琛. 微细电解加工工具电极制备方法及装置, 2019.01.11, 中国, 发明专利, 授权号: ZL201611072820.7
[10]伍晓宇, 雷建国, 钟金明, 徐斌, 郭登极, 阮双琛. 一种可变形的工具电极的电解加工工艺及其装置, 2019.06.28, 中国, 发明专利, 授权号: ZL201611179560.3
[11]伍晓宇, 吴世云, 雷建国, 徐斌, 汤勇, 周志文. 粉末冶金复合材料电极及其制备方法, 2019.12.11, 中国, 发明专利, 授权号: ZL 201911268546.4

代表著作：

获得荣誉：

[1]2022年度深圳市科技进步奖二等奖（第一完成人）
[2]2020年度广东省机械工程学会科学技术奖一等奖（第二完成人）
[3]2020年度广东省机械工业科学技术奖一等奖(第二完成人)
[4]2016年度中国光学工程学会创新技术奖一等奖（第四完成人）

主要学术兼职：

广东省科技项目评审专家；
深圳市科技项目评审专家；
中国机械工程学会特种加工分会会员；
《Journal of Materials Processing Technology》、《International Journal of Advanced Manufacturing Technology》等SCI期刊审稿人。