代表期刊论文 ：
1. Zejia Zhao, and Suet To. An investigation of resolved shear stress on activation of slip systems during ultraprecision rotary cutting of local anisotropic Ti6Al4V alloy: Models and experiments. International Journal of Machine Tools and Manufacture. 2018, 134: 69-78.
2. Zejia Zhao, Suet To, Jingwei Wang. Effects of grains and twins on deformation of commercial pure titanium in ultraprecision diamond turning. Journal of Materials Processing Technology. 2019, 271: 10-22.
3. Zejia Zhao, Suet To, Gaobo Xiao, et al. Effects of cutting angles on deformation of single crystal silicon in plunge cutting along <100> direction. Materials Letters. 2019, 253:234-237.
4. Zejia Zhao, Suet To, Zhuoxuan Zhuang. Serrated Chips Formation in Micro Orthogonal Cutting of Ti6Al4V Alloys with Equiaxial and Martensitic Microstructures. Micromachines. 2019. 10: 197.
5. Zejia Zhao, Suet To, Zhanwen Sun, et al. Microstructural effects of Ti6Al4V alloys modified by electropulsing treatment on ultraprecision diamond turning. Journal of Manufacturing Processes. 2019, 39: 58-68.
6. Zejia Zhao, Suet To, Wai Sze Yip, et al. A rapid method for grain growth of Ti6Al4V alloy and its machinability. International Journal of Advanced Manufacturing Technology. 2019, 104(5-8): 2347-2361.
7. Zejia Zhao and Suet To. A theoretical and experimental investigation of cutting forces and spring back behaviour of Ti6Al4V alloy in ultraprecision machining of microgrooves. International Journal of Mechanical Sciences. 2020, 169: 105315.
8. Jingwei Wang, Zhao Zejia, Shenhua Song, et al. High Performance Poly (vinyl alcohol)-Based Li-Ion Conducting Gel Polymer Electrolyte Films for Electric Double-Layer Capacitors. Polymers. 2018, 10(11): 1179. (共同一作)
9. Jingwei Wang, Zejia Zhao, R. Muchakayala, et al. High-performance Mg-ion conducting poly (vinyl alcohol) membranes: Preparation, characterization and application in supercapacitors. Journal of Membrane Science. 2018, 555: 280-289. (共同一作)
10. E. V. Jelenković, Suet To, Ling Chen, Zejia Zhao and Chak Yin Tang. Cutting properties of deposited amorphous silicon in ultra-precision machining. Journal of Micromechanics and Microengineering. 2018, 28(9): 095013.
11. Riming Nie, Zejia Zhao, Xianyu Deng. Roles of electrode interface on the performance of organic photodetectors. Synthetic Metals. 2017, 227: 163-169.
12. Yexiang Fu, Zejia Zhao, Waisze Yip, Suet To.Novel fabrication of a hierarchical structured surface with improved corrosion inhibition by using hydrothermal synthesis and ultraprecision machining.Surface and Coatings Technology. 2020, 385: 125432.
13.Zhao, Zejia, et al. "Hydrogen ion implantation induced cutting behavior variation in plunge cutting of the monocrystalline silicon." Nanomanufacturing and Metrology 4.4 (2021): 209-215.
14.Zhao, Zejia, et al. "Effects of microstructures on the material removal energy in ultraprecision machining of Ti6Al4V alloys." Materials Letters 300 (2021): 130231.
15.Zhao, Zejia, et al. "Material removal energy in ultraprecision machining of micro-lens arrays on single crystal silicon by slow tool servo." Journal of Cleaner Production 335 (2022): 130295.
16.Wang JW, Zhao Zejia, Weng Q, et al. Insights on polymeric materials for the optimization of high-capacity anodes[J]. Composites Part B: Engineering, 2022: 110131.(共同一作)
17.Wang JW, Zhao Zejia, Hu F, et al. Highly Reversible Zn Metal Anodes Enabled by Multifunctional Poly Zinc Acrylate Protective Coating[J]. Chemical Engineering Journal, 2022: 139058.
18.Zhao, Zejia, Suet To, Jingwei Wang, Guoqing Zhang, and Zhimin Weng. "A review of micro/nanostructure effects on the machining of metallic materials." Materials & Design 224 (2022): 111315.
19.Cui, Lang, Shengmin Shao, Haitao Wang, Guoqing Zhang, Zejia Zhao*, and Chunyang Zhao. "Recent advances in the equal channel angular pressing of metallic materials." Processes 10, no. 11 (2022): 2181.(通讯)
20.Zhao, Zejia, Yexiang Fu, Suet To, Guoqing Zhang, and Jianjun Lin. "Microstructural effects on the single crystal diamond tool wear in ultraprecision turning of Ti6Al4V alloys." International Journal of Refractory Metals and Hard Materials 110 (2023): 106038.
21.Yang, Yang, Rixiong Lin, and Zejia Zhao*. "Deterministic rendering of structural color induced by atypical nano-gratings in ultra-precision diamond cutting." Applied Surface Science 638 (2023): 158065.(通讯)
22.Yang, Yang, Jinqian Xiang, and Zejia Zhao. "An analytical cutting force model for elliptical vibration texturing of nano-grating surfaces." Journal of Materials Processing Technology 315 (2023): 117901.(通讯)
23.Tan, Yi, Wai Sze Yip, Te Zhao, Suet To, and Zejia Zhao*. "Subsurface damage and brittle fracture suppression of monocrystalline germanium in ultra-precision machining by multiple ion implantation surface modification." Journal of Materials Processing Technology 334 (2024): 118640.(通讯)
24.Liu, Chujun, Jingwei Wang, Zhongyang Liu, Zejia Zhao*, and Guoqing Zhang. "Design and movement mechanism analysis of a multiple degree of freedom bionic crocodile robot based on the characteristic of “death roll”." Journal of Field Robotics 41, no. 8 (2024): 2650-2662.(通讯)
25.Zhao, Zejia, Guoqing Zhang, and Wai Sze Yip. "“Micro/Nano Manufacturing Processes: Theories and Optimization Techniques”." Processes 12.8 (2024): 1746.(通讯)
26.Zhao, Zejia, Chujun Liu, Bo Xu, Jingwei Wang, Yingxue Yao, Tengfei Yin, Suet To, and Yang Yang. "Serrated chip formation in machining of difficult to cut metallic materials: a comprehensive review." Critical Reviews in Solid State and Materials Sciences (2025): 1-47.(通讯)
27.Zhao, Zejia, Jing Xiong, Lai Li, Haoyu Wang, Jiatian Lin, Liu Zhu, Dengji Guo, and Xujin Wang. "Fundamental study of surface generation in robot-assisted polishing of optical components." The International Journal of Advanced Manufacturing Technology (2025): 1-15.
28.Liang, Yiji, Canwen Dai, Jingwei Wang, Guoqing Zhang, Suet To, and Zejia Zhao*. "Typical applications and perspectives of machine learning for advanced precision machining: A comprehensive review." Expert Systems with Applications (2025): 127770.(通讯)
29.Dai, Canwen, Quanli Zhang, Jingwei Wang, Jiaqi Ran, and Zejia Zhao*. "An investigation of phase boundary effect on the cutting force fluctuation in orthogonal micro-cutting of Ti6Al4V alloy." Applied Surface Science 679 (2025): 161152.(通讯)
微信公众号