教育背景：

1）1997—2002，中国科学技术大学近代物理系，获物理学本科学位；
2）2002—2007，美国佐治亚理工学院，获材料学博士学位，导师王中林院士。

工作履历：

1）2008–2010，美国加州大学伯克利分校博士后研究员，导师张翔院士；
2）2011–2013，美国蒙氏电子材料公司，资深科学家，负责集团高效能源研发项目;
3）2014至今，深圳大学机电与控制工程学院访问教授；

主持项目：

1）广东省科技厅，省重点领域研发计划，2020B090924003，非金属材料超高速光固化增材制造关键技术与装备，2020-01至2022-12，700万元，参与；
2）广东省科技厅，省级重大科技专项项目，2017B090911014，轻质高强陶瓷增材制造关键技术研发及应用，2017-03至2020-02，300万元，主持；
3）深圳市科技创新委员会，海外高层次人才孔雀创新项目，KQJSCX20170327150948772，轻质高强陶瓷材料研发与应用，2017-09至2019-08，80万元，主持。

代表期刊论文 ：

近五年代表性论文
[1] Y Liu, Z Chen, J Li, Ba Gong, L Wang, C Lao, P Wang, C Liu, Y Feng, X Wang. 3D printing of ceramic cellular structures for potential nuclear fusion application, Additive Manufacturing, 35 (2020) 101348.
[2] J Zhu, C Lao, T Chen, J Li. 3D-printed woodpile structure for integral imaging and invisibility cloaking. Materials & Design, 191 (2020) 108618.
[3] P. Wang, A. Gebert, L. Yan, H.Li, C. Lao, Z. Chen, K. Kosiba, U. Kühn, S.Scudino, Corrosion of Al-3.5Cu-1.5Mg–1Si alloy prepared by selective laser melting and heat treatment, Intermetallics 124 (2020) 106871.
[4] Z Li, Z Chen, J Liu, Y Fu, C Liu, P Wang, M Jiang, C Lao. Additive manufacturing of lightweight and high-strength polymer-derived SiOC ceramics. Virtual and Physical Prototyping, 15 (2020) 163-177.
[5] Z Chen, Z Gong, Z Li, Z Zhu,P Qu, C Lao, P Wang, C Liu, A Atkinson. Characterisation of indentation microstructures for porous SOFC cathodes. Ceramics International, 46 (2020) 803-812.
[6] C. Liu, J. Tong, J. Ma, D. Wang, F. Xu, Y. Liu, Z. Chen, C. Lao, Low Temperature Deposition Manufacturing: A Versatile Materials Extrusion-based 3D Printing Technology for Fabricating Hierarchically Porous Materials, Journal of Nanomaterials, (2019) 1291067.
[7] P. Wang, C. Lao, Z. Chen, Y. Liu, H. Wang, H. Wenrock, J. Eckert, S. Scudino, Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting, Journal of Materials Science & Technology, 36 (2020) 18-26.
[8] Z. Chen, C. Liu, J. Li, J. Zhu, Y. Liu, C. Lao, J. Feng, M. Jiang, C. Liu, P. Wang, Y. Li, Mechanical properties and microstructures of 3D printed bulk cordierite parts, Ceramics International, 45 (2019) 19257-19267.
[9] M. Jiang, Z. Chen, J. Tong, C. Liu, G. Xu, H. Liao, P. Wang, X. Wang, M. Xu, C. Lao, Strong and ductile reduced activation ferritic/martensitic steel additively manufactured by selective laser melting, Materials Research Letters, 7 (2019) 426-432.
[10] C. Liu, F. Xu, Y. Liu, J. Ma, P. Liu, D. Wang, C. Lao, Z. Chen, High mass loading ultrathick porous Li4Ti5O12 electrodes with improved areal capacity fabricated via low temperature direct writing, Electrochimica Acta, 314 (2019) 81-88.
[11] C. Liu, F. Xu, X. Cheng, J. Tong, Y. Liu, Z. Chen, C. Lao, J. Ma, Comparative study on the electrochemical performance of LiFePO4 cathodes fabricated by low temperature 3D printing, direct ink writing and conventional roller coating process, Ceramics International, 45 (2019) 14188-14197.
[12] Z. Chen, J. Li, C. Liu, Y. Liu, J. Zhu, C. Lao, Preparation of high solid loading and low viscosity ceramic slurries for photopolymerization-based 3D printing, Ceramics International, 45 (2019) 11549-11557.
[13] Z. Chen, Z. Li, J. Li, C. Liu, C. Lao, Y. Fu, C. Liu, Y. Li, P. Wang, Y. He, 3D printing of ceramics: A review, Journal of the European Ceramic Society, 39 (2019) 661-687.
[14] Y. Fu, Z. Chen, G. Xu, Y. Wei, C. Lao, Preparation and stereolithography 3D printing of ultralight and ultrastrong ZrOC porous ceramics, Journal of Alloys and Compounds, 789 (2019) 867-873.
[15] C. Liu, J. Tong, M. Jiang, Z. Chen, G. Xu, H. Liao, P. Wang, X. Wang, M. Xu, C. Lao.Effect of scanning strategy on microstructure and mechanical properties of selective laser melted reduced activation ferritic/martensitic steel. Materials Science and Engineering: A, 766 (2019) 138364.
[16] P. Gao, S. Xu, Z. Chen, X. Huang, Z. Bao, C. Lao, G. Wu, Y. Mei, Flexible and Hierarchically Structured Sulfur Composite Cathode Based on the Carbonized Textile for High-Performance Li-S Batteries, ACS Appl Mater Interfaces, 10 (2018) 3938-3947.
[17] Z. Chen, J. Ouyang, W. Liang, Z. Yan, F. Stadler, C. Lao, Development and characterizations of novel aqueous-based LSCF suspensions for inkjet printing, Ceramics International, 44 (2018) 13381-13388.
[18] Y. Fu, G. Xu, Z. Chen, C. liu, D. Wang, C. Lao, Multiple metals doped polymer-derived SiOC ceramics for 3D printing, Ceramics International, 44 (2018) 11030-11038.
[19] C. Liu, Z. Cai, Y. Dai, N. Huang, F. Xu, C. Lao, Experimental comparison of the flow rate and cooling performance of internal cooling channels fabricated via selective laser melting and conventional drilling process, The International Journal of Advanced Manufacturing Technology, 96 (2018) 2757-2767.
[20] M. Jiang, C. Xu, H. Yan, G. Fan, T. Nakata, C. Lao, R. Chen, S. Kamado, E Han, B Lu. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion. Acta Materialia, 157 (2018) 53-71.
[21] C. Liu, N. Huang, F. Xu, J. Tong, Z. Chen, X. Gui, Y. Fu, C. Lao, 3D Printing Technologies for Flexible Tactile Sensors toward Wearable Electronics and Electronic Skin, Polymers, 10 (2018).
[22] M.G. Jiang, C. Xu, H. Yan, S.H. Lu, T. Nakata, C.S. Lao, R.S. Chen, S. Kamado, E.H. Han, Correlation between dynamic recrystallization and formation of rare earth texture in a Mg-Zn-Gd magnesium alloy during extrusion, Scientific Reports, 8 (2018) 16800.
[23] C. Liu, R. Zhang, Y. Yan, C. Lao, Analysis on the design of steel wire wound extrusion containers for hot extrusion process, Advances in Mechanical Engineering, 9 (2017).
[24] C. Liu, X. Cheng, B. Li, Z. Chen, S. Mi, C. Lao, Fabrication and Characterization of 3D-Printed Highly-Porous 3D LiFePO(4) Electrodes by Low Temperature Direct Writing Process, Materials (Basel) 10 (2017).
[25] Liu S, Kumari S, Hu Q, et al. A comprehensive analysis of coregulator recruitment, androgen receptor function and gene expression in prostate cancer, Elife, 6 (2018) e28482.
[26] H. Tang, S. Zhuang, Z. Bao, C. Lao, Y. Mei, Two-Step Oxidation of Mxene in the Synthesis of Layer-Stacked Anatase Titania with Enhanced Lithium-Storage Performance, ChemElectroChem, 3 (2016) 871-876.

代表会议论文：

代表专利：

1. “Multiple Energy source distributed power system”. C.S. Lao and J.B. Zhang, 2013;
2. “Piezoelectric and Piezoresistive Cantilever Sensors”. Z.L Wang and C.S.Lao, 2012;
3. “Piezoelectric Nanowire Vibration Sensors”. Z.L. Wang and C.S. Lao, 2012;
4. “Super Sensitive UV Detector Using Polymer Functionalized Nanobelts”. Z.L. Wang, C.S. Lao, and J. Zhou, 2012;
5. 刘长勇, 劳长石, 肖崇梁, 库志喻。一种三维锂电池制造方法, 发明专利, CN106099128A.2016;
6. 刘长勇, 劳长石, 肖崇梁, 库志喻。一种金属3D打印模具异型水路性能测试系统。发明专利, CN106370235A.2017;
7. 劳长石, 傅岳龙, 何奕。一种光敏树脂及其制备方法。发明专利，专利申请号：201710896494.X;
8. 陈张伟, 劳长石, 欧阳竟。一种喷墨打印用陶瓷墨水及其制备方法。发明专利，专利申请号：201710878738.1;
9. 劳长石, 陈张伟, 何奕, 卢振, 危岩。一种基于全息投影的3D打印方法与系统。发明专利，专利申请号：201810234619.7.

代表著作：

获得荣誉：

1）广东省五四青年奖章提名奖；
2）深圳市海外高层次人才；
3）国侨办第十届世界华裔杰出青年代表。

主要学术兼职：