教育背景：

2013.09-2016.12，深圳大学，工学博士

工作履历：

2019.11-至今，深圳大学，机电与控制工程学院，副研究员
2019.06-2019.10，深圳大学，机电与控制工程学院，助理教授
2017.01-2019.04，深圳大学-哈尔滨工业大学联合培养，博士后

主持项目：

[1]国家自然科学青年基金,20万元，结题，主持
[2]深圳市基础研究面上项目,30万元，结题，主持
[3]深圳市稳定支持计划面上项目，60万元，在研，主持
[4]深圳大学科研启动项目，20万元，结题，主持
[5]深圳大学教学改革项目，1万元，在研，主持

代表期刊论文 ：

[1] Jianguo Lei, Xiaoyu Wu*, Zhiwen Zhou, Bin Xu*, Likuan Zhu, Yong Tang. Sustainable mass production of blind multi-microgrooves by EDM with a long-laminated electrode. Journal of Cleaner Production, 2021, 279: 123492(12pp). （中科院一区，Top，IF：11.072）
[2] Jianguo Lei, Xiaoyu Wu*, Zhenlong Wang*, Bin Xu, Likuan Zhu, Wen Wu. Electrical discharge machining of micro grooves using laminated disc electrodes made of Cu and Sn foils. Journal of Materials Processing Technology, 2019, 271: 455-462. （中科院一区，Top，IF：6.162）
[3] Jianguo Lei, Xiaoyu Wu*, Bin Xu*, Zhentao Zhao, Shuangchen Ruan, Rong Cheng. Laminated fitting fabrication of Cu-Sn composite 3D microelectrodes and elimination of ridges on the machined surface of 3D micro-cavities. Journal of Materials Processing Technology, 2015, 225: 24-31. （中科院一区，Top，IF：6.162）
[4] Jianguo Lei, Bin Xu, Likuan Zhu*. Experimental study on the fabrication of 3D microelectrodes for electrochemical micromachining. IEEE Access, 2020, 8: 97056-97063. （中科院二区，Top，IF：3.745）
[5] Jianguo Lei, Kai Jiang, Xiaoyu Wu, Hang Zhao, Bin Xu*. Surface Quality Improvement of 3D Microstructures Fabricated by Micro-EDM with a Composite 3D Microelectrode. Micromachines, 2020, 11(9): 868(13pp). （中科院三区，IF：3.523）
[6] Jianguo Lei, Xiaoyu Wu*, Bo Wu, Bin Xu*, Kai Jiang, Zhenlong Wang, Shuangchen Ruan. Experimental research on eliminating the stair-stepping effect of laminated 3D microelectrodes by micro-ECM. The International Journal of Advanced Manufacturing Technology, 2018, 98: 937-946. （中科院三区，IF：3.563）
[7] Jianguo Lei, Xiaoyu Wu*, Bo Wu, Bin Xu, Dengji Guo, Jinming Zhong. Fabrication of 3D Microelectrodes by Combining Wire Electrochemical Micromachining and Micro-electric Resistance Slip Welding. Procedia CIRP, 2016, 42: 825-830.（EI）
[8] Kai Jiang, Xiaoyu Wu*, Jianguo Lei*, Zuohuan Hu, Guoli Gao, Yong Tang, Dongfeng Diao. Investigation on the geometric evolution of microstructures in EDM with a composite laminated electrode. Journal of Cleaner Production, 2021, 298: 126765(13pp).（中科院一区，Top，IF：11.072）（通讯作者）
[9] Bin Xu, Mengyang Wei, Xiaoyu Wu, Lianyu Fu, Feng Luo, Jianguo Lei*, Fabrication of Micro-Groove on the Surface of CFRP to Enhance the Connection Strength of Composite Part, Polymers, 13, 4039, 2021.11, (中科院二区，IF=4.967)（通讯作者）
[10] Zhiwen Zhou, Xiaoyu Wu*, Jianguo Lei*, Zuohuan Hu, Guoli Gao, Yong Tang, Chuntao Chang. Fabrication of microgrooves with secondary microstructures by electrical discharge machining using a functionally graded laminated electrode. Journal of Micromechanics and Microengineering, 2021, 31: 015003(10pp). （中科院三区，IF：2.282）（通讯作者）
[11] Bin Xu, Xinke Feng, Xiaoyu Wu, Feng Luo, Lianyu Fu, Xuetao Zhai, Yonghua Zhao, Hang Zhao, Jianguo Lei*. Micro-EDM-assisted machining micro-holes in printed circuit board. The International Journal of Advanced Manufacturing Technology, 2021, 113: 1191-1201. （中科院三区，IF：3.563）（通讯作者）
[12] Bin Xu, Kang Guo, Likuan Zhu, Xiaoyu Wu, Jianguo Lei*. Applying Foil Queue Microelectrode with Tapered Structure in Micro-EDM to Eliminate the Step Effect on the 3D Microstructure's Surface. Micromachines, 2020, 11: 335(14pp). （中科院三区，IF：3.523）（通讯作者）
[13] Wen Wu, Xiaoyu Wu*, Jianguo Lei*, Bin Xu, Kai Jiang, Zhaozhi Wu, Heming Yin, Wen Li. Fabrication of deep-narrow microgrooves by micro-EDM using rotary dentate disc foil electrodes in emulsion. Journal of Micromechanics and Microengineering, 2019, 29: 035014(10pp). （中科院三区，IF：2.282）（通讯作者）
[14] Zhaozhi Wu, Xiaoyu Wu*, Jianguo Lei*, Bin Xu, Kai Jiang, Jinming Zhong, Dongfeng Diao, Shuangchen Ruan. Vibration-assisted micro-ECM combined with polishing to machine 3D microcavities by using an electrolyte with suspended B4C particles. Journal of Materials Processing Technology, 2018, 255: 275-284. （中科院一区，Top，IF：6.162）（通讯作者）
[15] Bin Xu, Kang Guo, Xiaoyu Wu*, Jianguo Lei*, Xiong Liang, Dengji Guo, Jiang Ma, Rong Cheng. Applying a foil queue micro-electrode in micro-EDM to fabricate a 3D micro-structure. Journal of Micromechanics and Microengineering, 2018, 28: 055008(11pp). （中科院三区，IF：2.282）（通讯作者）
[16] Bin Xu, Xiaoyu Wu*, Jianguo Lei*, Hang Zhao, Xiong Liang, Rong Cheng, Dengji Guo. Elimination of 3D micro-electrode’s step effect and applying it in micro-EDM. The International Journal of Advanced Manufacturing Technology, 2018, 96: 429-438. （中科院三区，IF：3.563）（通讯作者）
[17] Kai Jiang, Xiaoyu Wu*, Jianguo Lei*, Zhaozhi Wu, Wen Wu, Wen Li, Dongfeng Diao. Vibration-assisted wire electrochemical micromachining with a suspension of B4C particles in the electrolyte. The International Journal of Advanced Manufacturing Technology, 2018, 97: 3565-3574. （中科院三区，IF：3.563）（通讯作者）
[18] Bo Wu, Xiaoyu Wu*, Jianguo Lei*, Bin Xu, Shuangchen Ruan, Jinming Zhong. Study on machining 3D micro mould cavities using reciprocating micro ECM with queued foil microelectrodes. Journal of Materials Processing Technology, 2017, 241: 120-128. （中科院一区，Top，IF：6.162）（通讯作者）
[19] Wenyan Luo, Xiaoyu Wu*, Jianguo Lei*, Bin Xu, Rong Cheng, Shuangchen Ruan. Micro resistance weld moulding to fabricate CuSn33 alloy parts. Journal of Materials Processing Technology, 2016, 231: 137-142. （中科院一区，Top，IF：6.162）（通讯作者）
[20] Bin Xu, Xiaoyu Wu*, Jiang Ma, Xiong Liang, Jianguo Lei*, Bo Wu. Shuangchen Ruan, Zhenlong Wang. Micro-electrical discharge machining of 3D micro-molds from Pd40Cu30P20Ni10 metallic glass by using laminated 3D micro-electrodes. Journal of Micromechanics and Microengineering, 2016, 26: 035004(10pp). （中科院三区，IF：2.282）（通讯作者）

代表会议论文：

[1] Jianguo Lei, Xiaoyu Wu*, Bin Xu, Likuan Zhu, Zhiwen Zhou, Dengji Guo, Kai Jiang, Yonghua Zhao. Fabrication of microgrooves by EDM using a laminated disc electrode consisted of different material foils. Procedia CIRP, 2020, 95:578-583.
[2] Kai Jiang, Xiaoyu Wu*, Jianguo Lei, Zhaozhi Wu, Bin Xu*, Dengji Guo, Dongfeng Diao. Investigation of the Step Effect in Laminated 3D Microelectrodes for Electrochemical Micromachining. Proceedings of the 13th Asia-Pacific Conference on Materials, 2018, 229-308.
[3] Zhaozhi Wu, Dengji Guo*, Xiaoyu Wu*, Bin Xu, Jianguo Lei, Kai Jiang, Dongfeng Diao. Vibration-assisted Micro-ECM by Laminated 3D Microelectrode Using a Low-concentration NaNO3 Electrolyte Containing Suspended B4C Particles. Proceedings of the 13th Asia-Pacific Conference on Materials, 2018, 309-318.
[4] Dengji Guo, Xiaoyu Wu*, Jianguo Lei, Bin Xu, Reo Kometani, Feng Luo. Fabrication of micro/nanoelectrode using focused-ion-beam chemical vapor deposition, and its application to micro-ECDM. Procedia CIRP, 2016, 42:733-736.

代表专利：

[1]雷建国，伍博，何振业，伍晓宇，徐斌，赵春洋，表面微沟槽的加工方法、微细电火花加工装置，2022.07.26，授权号: ZL 2021 1 0590247.3
[2]雷建国, 伍晓宇, 伍博, 徐斌, 周志文, 程蓉, 钟金明, 朱立宽, 赵航. 一种三维微结构加工方法及三维微结构, 2021.4.16, 授权号: ZL 201911328794.3
[3]雷建国, 伍晓宇, 周志文, 徐斌, 江凯, 汤勇, 赵航. 电火花磨削加工表面微沟槽的装置, 2021.2.9, 授权号: ZL202021626712.1
[4]雷建国, 伍晓宇, 徐斌, 周志文, 江凯, 朱立宽. 微细电解加工电极及微细电解加工装置, 202012.25, 授权号: ZL202020049577.2
[5]雷建国, 伍晓宇, 周志文, 徐斌, 江凯, 汤勇, 赵航. 电火花磨削加工表面微沟槽的方法及其装置, 2020.08.06, 申请号: CN202010785647.5
[6]雷建国, 伍晓宇, 徐斌, 周志文, 江凯, 朱立宽. 微细电解加工电极及其加工方法、微细电解加工装置, 2020.05.22, 申请号: CN202010023236.2
[7]伍晓宇, 雷建国, 鲁艳军, 徐斌, 翁昌兴, 谢晋, 汤勇. 电火花磨削复合加工工具、工具制备方法及加工方法, 2023.3.14, 授权号: ZL 201911201507.2
[8]伍晓宇, 雷建国, 徐斌, 汤勇, 唐恒, 周超兰. 一种多材质叠层电极的制备方法, 2020.9.29, 授权号: ZL 201911201507.2
[9]伍晓宇, 雷建国, 徐斌, 汤勇, 唐恒, 周超兰. 梯度材料电极及其制备方法, 2020.9.8, 授权号: ZL201911201335.9
[10]伍晓宇, 雷建国, 吴稳, 伍博, 鲁艳军, 徐斌. 微沟槽电火花加工工具电极及其制备方法, 2019.02.05, 授权号: ZL201710348594.9

代表著作：

获得荣誉：

[1]2022年度深圳市科技进步奖二等奖（第一完成人）
[2]2020年度广东省机械工程学会科学技术奖一等奖（第二完成人）
[3]2020年度广东省机械工业科学技术奖一等奖(第二完成人)
[4]2016年度中国光学工程学会创新技术奖一等奖（第四完成人）

主要学术兼职：

深圳市科技项目评审专家；
中国机械工程学会特种加工分会会员；
《Journal of Materials Processing Technology》、《International Journal of Advanced Manufacturing Technology》等SCI期刊审稿人。